Shademaker SAND ANCHOR Series Owner's Manual page 5

• Insert sand anchor in sand. Using handle, turn clockwise until sand anchor is
fully secure in sand (Fig. 5).
• Remove handle from sand anchor (Fig. 6).
(Fig. 5)
Install Umbrella
• Carefully lift and
• Line up drilled holes on center post with smaller holes on sand anchor (Fig. 8).
• Insert hitch pin through sand anchor and center post. Latch hitch pin together
(Fig. 7)
You are now ready to operate your umbrella!
•
(Fig. 6)
(Fig. 8) (Fig. 9)
4