Important User Information - OE Max Controls NX7 Installation Instructions Manual

Important User Information

Solid state equipment has operational characteristics differing from those of
electromechanical equipment. Because of this difference, and also because of
the wide variety of uses for solid state equipment, all persons responsible for
applying this equipment must satisfy themselves that each intended
application of this equipment is acceptable.
In no event will OE M
consequential damages resulting from the use or application of this
equipment.
The examples and diagrams in this manual are included solely for illustrative
purposes. Because of the many variables and requirements associated with
any particular installation, OE M
liability for actual use based on the examples and diagrams.
No patent liability is assumed by OE M
information, circuits, equipment, or software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without
written permission of OE M
Throughout this manual we use notes to make you aware of safety
considerations.
WARNING
IMPORTANT
ATTENTION
4
Controls be responsible or liable for indirect or
AX
Controls cannot assume responsibility or
AX
AX
Controls is prohibited.
AX
Identifies information about practices or circumstances
which may lead to serious personal injury or death,
property damage, or economic loss.
Identifies information that is critical for successful
application and understanding of the product.
Identifies information about practices or circumstances
that can lead to minor personal injury, property damage,
economic loss, or product malfunction. However,
depending on circumstances, failure to follow the
directions accompanying this symbol may also lead to
serious consequences.
Controls with respect to use of