Related Manuals for WamBam VG26100
Summary of Contents for WamBam VG26100
- Page 1 VG26100 ASSEMBLY INSTRUCTIONS STEADY ASSEMBLY INSTRUCTIONS FREDDY VG26100 VINYL GATE 60 MIN Want to see a video on how to assemble this product? Scan the QR code WWW.WAMBAMFENCE.COM VER. 110822 WWW.WAMBAMFENCE.COM...
- Page 2 VG26100 ASSEMBLY INSTRUCTIONS GENERAL IMPORTANT INFORMATION Check the inside of the larger pieces in your box for other materials packed inside. unobstructed assembling. components. MISSING VISIT OUR WEBSITE FIRST, PARTS? DAMAGED SO WE CAN HELP YOU RIGHT AWAY! Although great care has been taken to ensure proper packaging care department.
- Page 3 VG26100 ASSEMBLY INSTRUCTIONS INFORMATION GENERAL understand your fence. 1. That you have everything necessary to complete the gate. 2. That you will have assembled the gate frame in the correct order. 4. The gate height and width are similar to the measurements shown on page four.
- Page 4 VG26100 ASSEMBLY INSTRUCTIONS DETAILED PRODUCT DIMENSIONS AND SPECIFICATIONS 48in. 73.5in. 72in. 48in. 2in. 3in. Ground Ground 50in. 3in. 54in. 42in. Center to Center WamBam Anchor (Large) 1.5in. 1.5in. 3.5in. 3.5in. 3.5in. 1.5in. Top Rail Bottom Rail Vertical Stile .090in. wall thickness...
- Page 5 VG26100 ASSEMBLY INSTRUCTIONS LAY OUT MATERIALS STEP 1: Hinge (2) Metal Post Gate Jig 1¼ Note: Marked Note: Marked labeled “1”. labeled “2”. 1¼ Tension Pin (2) Note: Marked Note: Marked labeled “3”. labeled “4”. WWW.WAMBAMFENCE.COM...
- Page 6 VG26100 ASSEMBLY INSTRUCTIONS STEP 2: STEP 2.1 STEP 2.2 Stabilizer and pound it into the ground. into the metal post stabilizer and determine Note: The metal post 5½” stabilizer is only used for the hinge side post. STEP 2.3 STEP 2.4 Place the Gate Jig metal post stabilizer.
- Page 7 VG26100 ASSEMBLY INSTRUCTIONS STEP 2.7 Make sure to fasten the fence panels ASSEMBLE STEP 3: STEP 3.1 STEP 3.2 STEP 3.3 into the corner brackets opposite corner bracket. WWW.WAMBAMFENCE.COM...
- Page 8 VG26100 ASSEMBLY INSTRUCTIONS STEP 4: STEP 4.1 STEP 4.2 ASSEMBLE GATE FRAME TOP STEP 5: STEP 5.1 STEP 5.2 Insert the Top Rail as illustrated. WWW.WAMBAMFENCE.COM...
- Page 9 VG26100 ASSEMBLY INSTRUCTIONS STEP 6: STEP 6.2 STEP 6.1 Note: The lower hinge will be installed below the two screws on the corner bracket. 48” STEP 7: STEP 7.1 STEP 7.2 onto the brackets Fasten the Latch Finger onto the stainless WWW.WAMBAMFENCE.COM...
- Page 10 VG26100 ASSEMBLY INSTRUCTIONS STEP 8: STEP 8.1 STEP 8.2 WWW.WAMBAMFENCE.COM...
- Page 11 VG26100 ASSEMBLY INSTRUCTIONS GATE AND STEP 9: STEP 9.1 Align the gate to the horizontal fence rails. Note: Both the fence & gate hori- zontal rail spacing can be adjusted to lower heights. STEP 9.2A Fasten the hinges to the posts per hinge.
- Page 12 VG26100 ASSEMBLY INSTRUCTIONS STEP 9.2B your drill slightly as illustrated. Note: Swing the gate open and pre-drill four more holes for the hinge screws as illustrated. Top View Note: Angle your drill to pierce into the angled illustrated. STEP 9.2C STEP 9.2D...
- Page 13 VG26100 ASSEMBLY INSTRUCTIONS LEVEL GATE AND STEP 10: STEP 10.1 STEP 10.2 STEP 10.3 insert the into one of the holes on the pin to release tension in the gate hinge. WWW.WAMBAMFENCE.COM...
- Page 14 VG26100 ASSEMBLY INSTRUCTIONS STEP 11: STEP 11.1 Align and fasten the Latch Catch WWW.WAMBAMFENCE.COM...
- Page 15 VG26100 ASSEMBLY INSTRUCTIONS OVER A ALTERNATIVE APPLICATION: STEP 1.1 If the a temporary spacer. Proceed installing the panels according guide. Sidewalk/path OVER A ALTERNATIVE APPLICATION: STEP 1.1 If the Sidewalk/path mounts must be purchased separately and can be found by...
- Page 16 VG26100 ASSEMBLY INSTRUCTIONS 6935 Reames Rd. Ste. K. hmmm@wambamfence.com 704-892-5222 877-778-5733 WWW.WAMBAMFENCE.COM WWW.WAMBAMFENCE.COM...
Need help?
Do you have a question about the VG26100 and is the answer not in the manual?
Questions and answers