Adjustment Tips For The Operating Menu; Switching Between Channel Banks; Switching Between The Channels In A Channel Bank; Selecting The Frequencies To Be Stored In The Channel Bank "U - Sennheiser EK 1038 Instructions For Use Manual

Adjustment tips for the operating menu

BANK

Switching between channel banks

Via the "BANK" menu, you can switch between the transmitter's
nine channel banks. Each of the channel banks "1" to "8" has up to
20 switchable channels that are factory-preset to a transmission
frequency. The channel bank "U" (user bank) has up to 20 switcha-
ble channels to store your selection out of 1440 transmission fre-
quencies that are freely selectable within the preset frequency
range.
When switching from one channel bank to another, the channel
with the lowest channel number is automatically displayed.
CHAN

Switching between the channels in a channel bank

Via the "CHAN" menu, you can switch between the different chan-
nels in a channel bank.
TUNE Selecting the frequencies to be stored in the channel
bank "U"
Via the "TUNE" menu, you can select the frequencies to be stored in
the channel bank "U" (user bank).
When you have selected one of the channel banks "1" to "8" and
then select the "TUNE" menu, the transmitter automatically
switches to channel 01 of the channel bank "U".
In this case, "U.01" briefly appears on the display.
SENSIT

Adjusting the sensitivity

Via the "SENSIT" menu, you can adjust the transmitter's input sen-
sitivity.
Note:
When using the transmitter with the tourguide system, the
channel bank "8" must be selected.
Use the / buttons to select the desired transmission fre-
quency. Transmission frequencies are tunable in 25-kHz steps
within a switching bandwidth of 36 MHz max. For intermodula-
tion-free frequencies, please refer to the enclosed frequency
table.
Adjustment tips for the operating menu
45