Indications - Sennheiser EK 1038 Instructions For Use Manual

EK 1038 receiver
10

Indications

Alphanumeric display
4-step battery status display
Lock mode icon (lock mode is activated)
Operation and battery status indication
The red LED (LOW BAT/ON)
operating state of the receiver:
Red LED lit up: The receiver is switched on and the capacity of the
batteries/rechargeable battery BA 2015 is suffi-
cient.
Red LED flashing:The batteries are/the rechargeable battery BA
2015 is going flat (LOW BAT)!
In addition, the 4-step battery status display
panel provides information on the remaining battery/rechargeable
battery BA 2015 capacity:
3 segments: capacity approx. 100 %
2 segments: capacity approx. 70 %
1 segment: capacity approx. 30 %
Battery icon flashing: LOW BAT
RF signal indication
The green LED (RF) at the front of the receiver lights up when an
RF signal is being received.
However, the green LED (RF) does not light up when the audio out-
put is muted because the RF signal of the received transmitter is too
weak.
Display backlighting
After pressing a button, the display remains backlit for approx. 15
seconds.
provides information on the current
on the display