Adjustment tips for the operating menu
BANK
Switching between channel banks
Via the "BANK" menu, you can switch between the transmitter's
nine channel banks. Each of the channel banks "1" to "8" has up to
20 switchable channels that are factory-preset to a transmission
frequency. The channel bank "U" (user bank) has up to 20
switchable channels to store your selection out of 1440
transmission frequencies that are freely selectable within the
preset frequency range.
When switching from one channel bank to another, the channel
with the lowest channel number is automatically displayed.
CHAN
Switching between the channels in a channel bank
Via the "CHAN" menu, you can switch between the different
channels in a channel bank.
TUNE
Selecting the frequencies to be stored
in the channel bank "U"
Via the "TUNE" menu, you can select the frequencies to be stored in
the channel bank "U" (user bank).
When you have selected one of the channel banks "1" to "8" and
then select the "TUNE" menu, the transmitter automatically
switches to channel 01 of the channel bank "U".
In this case, "U.01" briefly appears on the display.
Note:
When using the transmitter with the tourguide system, the
channel bank "8" must be selected.
Use the
/
buttons to select the desired transmission
frequency. Transmission frequencies are tunable in 25-kHz steps
within
a switching
intermodulation-free frequencies, please refer to the enclosed
frequency table.
bandwidth
of
36 MHz
max.
For
49