Table of Contents
Advertisement
SK 100 G2 / SK 300 G2 / SK 500 G2 bodypack transmitters
Using the bodypack transmitter
Switching the transmitter on/off
The transmitter can only be switched off when the standard display
is shown on the display panel. When in the operating menu, briefly
pressing the
ON/OFF
button will cancel your entry (ESC function)
and return you to the standard display with the last stored settings.
Note:
Remove the batteries or the rechargeable battery when the
transmitter will not be used for extended periods of time.
Press the two unlocking buttons
partment cover
.
Press the
ON/OFF
button
LED
lights up.
To switch the transmitter off, press the
"OFF" appears on the display. The red LED
Close the battery compartment. The battery compartment cover
locks into place with an audible click.
Muting the transmitter
The transmitter has a
transmitter's audio signal without switching the transmitter off.
Set the
MUTE
switch
play appears on the display panel.
Set the
MUTE
switch
mit the audio signal.
Operation and battery status indication
The red LED (LOW BAT/ON)
operating state of the transmitter:
Red LED lit up: The transmitter is switched on and the capacity of
the batteries/BA 2015 rechargeable battery is sufficient.
Red LED flashing:The batteries are/the BA 2015 rechargeable bat-
tery is going flat (LOW BAT)!
and open the battery com-
to switch the transmitter on. The red
ON/OFF
goes off.
MUTE
switch that noiselessly mutes the
to the position 'MUTE'. The "MUTE" dis-
back to the original position to retrans-
provides information on the current
button
until
35
Hide quick links:
Advertisement
Table of Contents
