Sennheiser EK 1038 Instructions For Use Manual page 15

Getting into the operating menu of the setup menu
Press the SET button
operating menu. The first menu "LOCK" flashes on the display.
Selecting a menu
Press the / rocker button (UP/DOWN) to select the menu you
would like to adjust the setting.
The current setting that can be adjusted flashes on the display.
The setup menu comprises six menus that can be chosen in the fol-
lowing order:
Display Function of the menu
LOCK Activating/deactivating the lock mode (see page 20)
Setting a receiving frequency for the channe
TUNE
and locking channles for the user (see page 20)
SQELCH Adjusting the squelch threshold (see page 21)
Acitvating/deactivating the limiter at the headphone
LTD
output (see page 22)
Displaying the revision of the firmware* (see see "SW-
SW-REV REV" on page 22)
*software stored on a chip in the device
Setting several receivers to the same channel and receiver
COPY
settings simultaneously (see "COPY" on page 22)
Getting into the setting mode of a menu
Press the SET button to get into the setting mode of the
selected menu.
The current setting that can be adjusted flashes on the display.
Using the receiver
to get from the start display into the
ls (see page 20)
15