Sennheiser EK 1039 - Tourguide Receiver Manual

Also See for EK 1039:

Specifications (3 pages)

Instruction manual (30 pages)

Manual (28 pages)

Table of Contents

Contents

1 Operating controls
2 Specifications
3 Fixed programmed frequency presets
4 Documents / Resources
- 4.1 References
- 4.2 Download manual

Sennheiser EK 1039 - Tourguide Receiver Manual

The EK 1039 receiver is part of the Tourguide 1039 system.

Please read the instruction manual for the Tourguide 1039 system before using the EK 1039 receiver. The instruction manual can be downloaded from www.sennheiser.com.

warning For your safety

The EK 1039 receiver is capable of producing sound pressure levels exceeding 85 dB (A). Listening at high volume levels for long periods can lead to permanent hearing defects.

Inform the users of your Tourguide application about these facts and, if necessary, ask them to set the volume to a medium level.
Do not continuously expose yourself to high volumes.

Operating controls

On/off/volume control
3.5 mm jack socket for headphones (min. 8 Ω), lockable
Receiving antenna
Operation and battery status indicator "LOW BATT/ON", red LED:
lit = ON;
flashing = LOW BATT
RF signal indicator, green LED
Charging contacts
SET button
▲/▼ rocker button (UP/DOWN)
Battery compartment
Battery compartment cover
Battery compartment catches
Infra-red interface
ESC button
Display panel, backlit in orange
Channel name
Receiving channel
Battery status
Lock mode icon

Specifications

Modulation	wideband FM
RF frequency range (Aw+, Gw, Bw, Cw, Dw)	470.100–558, 558–626, 626–698, 718–790, 790–865 MHz
Receiving channels	max. 32
Signal-to-noise ratio (1 mV_RF peak dev.)	approx. 90 dBA_rms
AF frequency response	40–15,000 Hz
Output power 2.4 V, 5% THD and nominal dev.	100 mW (32 Ω)
Headphone output	3.5 mm jack socket for headphones with at least 8 Ω
Power supply	2 AA size batteries, 1.5 V (alkali manganese) or BA 2015 accupack
Operating time	approx. 8 hours
Dimensions	approx. 81 x 65 x 23 mm
Weight (incl. BA 2015)	approx. 200 g