Advertisement
Quick Links
4K60Hz HDBaseT 3.0 Receiver with USB
Device Inputs, Audio De-embed & PoH
RX3-100
WyreStorm recommends reading through this document in its entirety to become familiar with the product's features prior
to starting the installation process.
IMPORTANT! Installation Requirements
• Visit the product page to download the latest firmware, document
version, additional documentation, and configuration tools.
• Read through the
Wiring and Connections
guidelines before creating or choosing premade cables.
• While this product supports CEC, WyreStorm cannot guarantee
compatibility with all forms of CEC communication.
Basic Wiring Diagram
SYN-KEY10
SW-120-TX3
Personal
SYN-KEY10
Computer
SW-120-TX3
Laptop
Network Switch
Sygma Cloud Management
Dante Network Switch
Copyright © 2023 WyreStorm ProAV Corporation |
RX3-100 Quickstart Guide | 231101
section for important wiring
Personal Computer
Laptop
UC Codec
Document
Camera
Laptop
Local Monitor
Keyboard and Mouse
wyrestorm.com
In the Box
1x RX3-100 HDBaseT 3.0 Receiver
1x 3-pin Terminal Block
4x Wall Mounting Brackets
4x Mounting Screws
1x 20V 3A PSU*
1x Quickstart Guide
*Does not support USBC charging on TX
RX3-100
ROOM 2
NHD-500-TX
NHD-500-RX
CAM-210-PTZ
Boundary
Mics
Capture
Card
PIR Sensor
1 of 4
Quickstart Guide
Amplifier
Short Throw
USB Camera
Projector
Laptop
Display Device
Network Switch
Ceiling Speakers
Ceiling Speakers
RX3-100
Projector
Display Device
INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973)
KEY
HDMI/USB-C
HDBaseT
RS-232
Analog Audio
USB
RX3-100
support@wyrestorm.com
Advertisement
Related Manuals for Wyrestorm RX3-100
Summary of Contents for Wyrestorm RX3-100
- Page 1 4K60Hz HDBaseT 3.0 Receiver with USB Device Inputs, Audio De-embed & PoH Quickstart Guide RX3-100 WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the installation process. In the Box IMPORTANT! Installation Requirements 1x RX3-100 HDBaseT 3.0 Receiver...
- Page 2 Pin 1, Pin 3 and Pin 4 are reserved. The positions of these two pins will not affect IR and RS-232 function. Copyright © 2023 WyreStorm ProAV Corporation | wyrestorm.com INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973)
- Page 3 Wiring and Connections WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the switcher. Read through this section in it’s entirety before running or terminating the wires to ensure proper operation and to avoid damaging equipment.
- Page 4 Copyright © 2023 WyreStorm ProAV Corporation | wyrestorm.com INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973) 1 of 4 RX3-100 Quickstart Guide | 231101 support@wyrestorm.com...
Need help?
Do you have a question about the RX3-100 and is the answer not in the manual?
Questions and answers