Wyrestorm RX-70-IR-POH Instruction Manual

Wyrestorm RX-70-IR-POH Instruction Manual

Extender set solutions

Advertisement

Quick Links

Wyrestorm Extender Set
Solutions
Please read these instructions carefully before installing to avoid complications later.
Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343
RX-70-IR-POH
HDMI
Extension over Cat5e/6/7 with Class B
®
HDBaseT™ up to 70m/230ft with bidirectional
IR control, RS232 and Power-over-HDBaseT
Instruction Manual
Thank you for choosing this Wyrestorm product.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RX-70-IR-POH and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Wyrestorm RX-70-IR-POH

  • Page 1 HDBaseT™ up to 70m/230ft with bidirectional IR control, RS232 and Power-over-HDBaseT Instruction Manual Thank you for choosing this Wyrestorm product. Please read these instructions carefully before installing to avoid complications later. Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
  • Page 2: Table Of Contents

    Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
  • Page 3: Features

    1080i, 720p with screen refresh rates of 24Hz, 30Hz, 50Hz and 60Hz. • Centralized RS232 for third party control with open source integration protocols available for market Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
  • Page 4: Safety Precautions

    US: +866 677 0053 EU: +44 (0) 1793 230 343 connections. 7. Only use attachments/accessories specified by the manufacturer. Specifications Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
  • Page 5: Panel Description

    LED HDBaseT Signal Link Indicator (Lit for Active) HDMI Output IR Receiver Port IR Transmitter Port DC 5V Power Input LED Power Indicator (Lit for Active) Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
  • Page 6: Pro Plus Poh Cabling Guide / Typical Application

    The quality of termination for every RJ45 is essential. Poor terminations leads to intermittent performance and longer install times Pro Plus Class B HDBaseT Display Receiver with PoH RX-70-IR-POH 1080p No Signal Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
  • Page 7: Initial Connection

    3 and Pin 5 of a DB-9 Connector with a Volt Meter. If a voltage of -3V to -15V is achieved, the device is DTE. If the voltage is on Pin 2, then the device is DCE. Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
  • Page 8 ------- GND ------- GND ------- DTR ------- DTR ------- CTS ------- CTS ------- RTS ------- RTS ------- RI Mark (1) -12v start stop space (0) +12v Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
  • Page 9: Updating Rs232 Settings

    To allow serial commands sent from transmitting device to be sent to display device, simply connect a 9 pin straight through RS232 cable between the RX-70-IR-POH and your display. rs232 ir tx hdmi hdmi HDMI ir rx rs232 cat5e/6 ir tx 70m/230ft ir rx Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
  • Page 10: Troubleshooting

    If not then the problem could lie with the input or output device rather than the means of distribution i.e. the cable, receiver or matrix itself. Signal Generator TTSignal Part Number Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
  • Page 11 It may be an EDID issue in that the source reads the audio EDID from the display and only requests two channel Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
  • Page 12: Faq's

    For non-PoH Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
  • Page 13: Maintenance

    HDCP “keys” are assigned to a display when connected to a HDMI device normally. This doesn’t change when connected to a switch; it just assigns more of them. Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
  • Page 14: Product Service

    Should you feel your product does not function For example: damages for lost time, the cost of having a person/persons remove or re-install previously installed adequately due to defects in materials or workmanship, Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
  • Page 15: Installation Notes

    Parts and service not covered by this limited warranty are not the responsibility of the warrantor and should be considered the responsibility of the individual. Installation Notes Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343...
  • Page 16 Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583 Wyrestorm Technical Support WyreStorm Technical Support WyreStorm Technical Support...

Table of Contents