Timer Recording - JVC HR-VP672U Instructions Manual

48 EN
PLAYBACK
Q. What happens if the end of the tape is reached
during playback or search?
A. The tape is automatically rewound to the beginning.
Q. Can the VCR indefinitely remain in the still mode?
A. No. It stops automatically after 5 minutes to protect
the heads.
Q. During search, slow, still and frame-by-frame
playback, I can't hear any audio. What's the
problem?
A. This is normal.
Q. DuringParch, stilland frame-by-frame playbockl
the picture isintermittent.What'sthe cause?
A. Picture loss occurswhen thesetypesof playbackare
attempted with a taperecorded in LPmode.Pressing
PLAYto return to normal playbackwill restorethe
picture.
Q. Whenretumin 8 from .mu!tl-speed s earchto normal
playhacl_ the picture is disturbed.ShouldI be
concerned aboutthisl
A. No, it isnormal.
Q. Noise bars appear during multi-speed search. What's
the problem!
A. This is normal.
Q. when playi.n.F h ackprogramsthat havebeen timer-
recordedwith comecuth_ times(suchone program
from 8.'00to 9.'00and anotherone from 9.'00to
10.'00),the picture.andsoundbecomemomentarily
distortedat the point wherethe firstprogramends
andthe second programbegins.Isthis a
malfunctionr
A. No. This isnormal.
Q. Other than preventing further recording, what effect
does removing the safety tab have!
A. It disables marking of index codes.
Q. Sometimes, dudng Index Search, the VCR can't find
the program I want to see. why not!
A. There may be index codes too close together
Q. During playback, on-screen operational indicators
sometimes jitter. Why does this happen?
A. If the condition of the tape being played back is not
good, jittering of the video (including on-screen
indicators) may occur.
RECORDING
Q. When I pause and then resume a recording, the end
of the recording before the pause is overlapped by
the new recording. Why does this happen?
A. This is normal. It reduces distortion at the pause and
resume points.
Q. Can the VCR indefinitely remain in the Record-Pause
mode?
A. No. The VCR automatically goesto itsStop mode
after 5 minutes to protect the heads. When paused
during Instant Timer Recording (fiR), the VCR shuts
off automatically after 5 minutes.
Q. What happens if the taperuns out duringrecording?
A. The VCRautomatically rewindsit tothe beginning.
TIMER RECORDING
Q. REC and E) remain lit on the front display panel. Is
there a problem?
A. NO. This is a normal condition for a timer recording
in progress.
Q. Can I program the timer while I'm watching a tape
or a "IV broadcast_'
A. Yes, but while you are setting the timer you won't see
the tape's or broadcastprogram's picture as it is
replaced by the on-screen menu. The audio from the
tape or broadcast program will be presentduring the
setting of the timer.