Express Timer Programming - JVC HR-VP672U Instructions Manual

34 EN
Express Timer
Programming
Turn on the TV and select the VCR channel 3 or 4 (or AV |
1
mode).
J
[VP672U]
[VP47ZU|
You can directly program the VCR's timer to record up to 8
shows, as far as a year in advance. Remember, the clock musl be
sel before you can program Ihe limer (;-_" pg. 8 or 11 ).
LOAD A CASSETTE
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape, then load it into
the VCR.
• The VCR comes on, and the counter is reset,
automatically.
ACCESS VCR PLUS+
SCREEN
Press PROG.
ACCESS PROGRAM
SCREEN
_®='1
Press START +/-. (If you're
just starting out,
"PROGRAM
I" appears.)
SETPROGRAMSTART TIME
Press START +/- to enter moaR/_l1
.thetime you want record-
m8 to start. Sr_
press and hold START
+/- to move in 30-minute
increments, or press and
release repeatedly to
move 1 minute at a time.
SETPROGRAMSTOPTIME
Press STOP +/- to enter the time you want recording to
stop.
• press and hold STOP +/- to move in 30-minute
increments, or pressand release repeatedly to move I
minute at a time.
SETPROGRAMDATE
press DATE +/-. (The current data is displayed on
screen. The date you enter appears in its place.}