Edit To Another Vcr - JVC HR-VP672U Instructions Manual

Edit To
Another VCR
[VP672U]
Your VCR
AUDIO OUT
VIDEO OUT
VIDEO IN
AndioiV'_eo cable
(no(supplied)
AUDIO IN
WP472U]
YourVCR
AUDIO OUT •VIDEO OUT I I"
' Audio/Video cable
(not supplied)
!
/
VIDEO IN f_ AUDIO IN
Recoiler X _p I_ --/Another VCR
You can use your VCR as the player and another VCR as the
recorder.
MAKE CONNECTIONS
Connect an AV cable between your VCR's VIDEO OUT
and AUDIO OUT connectors and another VCR's
VIDEO IN and AUDIO IN cannectors
For HR-VP672U owners...
When connecting to a monaural VCR, connect your
VCR's AUDIO OUT L connector to the AUDIO IN
connector on the monaural VCR.
For HR-VP472U owners..,
When connecting to a Hi-Fi VCR, connect your
VCR's AUDIO OUT connector to the AUDIO IN L
connector on the Hi-Fi VCR.
LOAD CASSETTES
Insert the playback cassette into your VCR and the
cassetteto be recorded on into the other VCR.
SETRECORDER'S INPUT
MODE
Setthe otherVCR'sauxiliary(AV)inputmode.
SELECT "EDIT" FORPIC-
TURECONTROL SETMODE
Follow the "picture Control" section on page 20, then
select "EDIT."
NOTE:
When you select "EDIT" to dub tapes, be sure to select
AUTO or (NORM when VIDEO CALIBRATION is set to
OFF) after you finish dubbing the tapes.
START PLAYER
.Setto its play mode.
NOTE:
If the player is equipped with a superimpose/OSD
disable feature then set "SUPERIMPOSE" to OFF before
pressing PI.AY _ pg. 23).
START RECORDER
Set to its record mode.