Auto Clock Set/Auto Tuner Set; Plug& Playsetup - JVC HR-VP672U Instructions Manual

SEN
Plug & Play
Auto Clock Set/Auto Tuner Set
ATTENTION
If you use a cable box, Plug & Play will not function; set
the clock and tuner channels manually• (I:T pg.t 1 - 15)
[VP672U]
[VP472U]
The Plug & Play function setsthe clock and tuner channels
automatically when power is first connected to the VCR. The
antenna cable must be connected for the Plug & Play function.
The time and date can be set automatically from clock setting
data that is transmitted by one of the regular TV broadcast
channels. We call this TV channel the _Host Channel" and it is
a PBS channel in your area.
PLUG& PLAYSETUP
Connect the antenna cable to the VCR (_r pg. 6). Then
connect the VCR's power plug to an AC outlet. Do not
power on the VCR. The clock and tuner channelswill
be set automatically.
NOTES:
• Auto clock set is performed first. The auto clock set
function scans all the channels received by your VCR
to find the Host Channel and then sets the clock.
"Auto= blinks on the front display panel during Auto
clock set.
• Auto channel set is performed next. The auto channel
set function scans all the channels that are receivable
by your VCR. It then automatically assignseach
receivable channels to the CHAT (+/-) buttons. #
skips non-receivable channels. During auto channel
set the channe! numbers are displayed as they are
scanned and set.
• When Plug & Play has beencompleted suecessfully the
correcttime is displayed.
• If an incorrect time or "--:- _ appears on the display
panel, see '_WhatTo Do If Plug & Play Has Failed"on
next page.
IMPORTANT
• Don't pressany buttons on the VCR or remotewhile
Plug& Playis in progress.
• If youporfon'nPlug& Playsuccesdully, there's ne needto
perform the Clock ItT pS.11)andTuner (o" p_ 14)
procedures. If, however, y ou warnto addordelete
channels,referto",_qdOr DeleteA Channel" o n pase15.
During Initial Auto Clock Set During Auto Channel Set
"Auto" blinks, The channel numbers are displayed
as they are scanned and set.
II
Plug & Play Completed
The current time (including
AivVPM) is displayed.
" If an incorrect time or "- -:- -" appears on the display panel, see "What To Do If Plug & Play Has Failed"on next page.