Maintenance And Care; Disposal Information - Flex LD 18-7 125 R Original Operating Instructions

LD 18-7 125 R/LD 18-7 150 R
8. Sanding in corners:
– Switch off the power tool and wait
until the sanding tool has come
to a standstill.
– Pull out pivoted edge segment and
swivel to left.
– Switch on power tool again.
9. After work, switch off the electric power
tool and pull out the mains plug.
Brush ring
The guard features a brush ring. This ring
has two functions:
– As the ring projects above the surface
of the sanding pad, it is the ring which
comes into contact with the work sur-
face first. As a result, the sanding pad
is brought parallel to the work surface
before the sanding tool comes into
contact with the work surface.
This avoids a sickle-shaped depression
caused by the edge of the sanding pad.
– The ring retains the dust until it is
extracted by the dust extractor.
If the brush ring is damaged or excessively
worn, it should be replaced.
A replacement brush set is available from
any FLEX customer service centre.

Maintenance and care

WARNING!
Before performing any work on the electric
power tool, pull out the mains plug.
Cleaning
WARNING!
Do not use water or liquid detergents.
Regularly blow out the housing interior

and motor with dry compressed air.
Clean the guard and pivoted edge

segment using dry compressed air.
Repairs
Repairs and replacement of the supply cord
may be carried out by an authorised
customer service centre only.
NOTE
During the warranty period do not loosen
the screws on the motor housing.
Non-compliance will deem the guarantee
obligations of the manufacturer null and void.
Spare parts and accessories
Further accessories, in particular insert
tools, as well as exploded drawings and
spare parts lists can be found on our
homepage "http://www.flex-tools.com/"
www.flex-tools.com or contact a sales
partner.

Disposal information

WARNING!
Render redundant power tools unusable
by removing the power cord.
EU countries only
Do not throw electric power tools
into the household waste!
In accordance with the European Directive
2012/19/EU on Waste Electrical and
Electronic Equipment and transposition into
national law used electric power tools must
be collected separately and recycled in an
environmentally friendly manner.
NOTE
Please ask your dealer about disposal
options!
23