Flex LD 18-7 125 R Original Operating Instructions page 14

ContentsContentsContentsCont
ents
Symbols used in this manual . . . . . . . . . 14
Symbols on the power tool . . . . . . . . . . 14
Important safety information . . . . . . . . . 14
Noise and vibration . . . . . . . . . . . . . . . . 17
Technical specifications . . . . . . . . . . . . 18
Overview . . . . . . . . . . . . . . . . . . . . . . . . 19
Instructions for use . . . . . . . . . . . . . . . . 20
Maintenance and care . . . . . . . . . . . . . . 23
Disposal information . . . . . . . . . . . . . . . 23
Declaration of Conformity . . . . . . . . 24
Declaration of Conformity . . . . . . . . 24
Exemption from liability . . . . . . . . . . . . . 24
Symbols used in this manual
WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.
Symbols on the power tool
Before switching on the power
tool, read the operating manual!
Wear goggles!
Disposal information for the old
machine (see page 23)!
14
LD 18-7 125 R/LD 18-7 150 R
For your safety
WARNING!
Before using the power tool, please read
and follow:
these operating instructions,
-
the "General safety instructions" on the
-
handling of power tools in the enclosed
booklet (leaflet
the currently valid site rules and the
-
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The power tool
may be operated only if it is
as intended,
-
in perfect working order.
-
Faults which impair safety must be repaired
immediately.
Intended use
The renovation sander LD 18-7 125 R/
LD 18-7 150 R is designed
- for commercial use in industry and trade,
- for dry sanding and smoothing of
concrete, plaster, screed, sandstone,
chamotte and asphalt,
- for grinding paintwork and adhesive
residue off concrete or screed,
- for use with diamond-tipped tools which
FLEX offers for this power tool and which
are authorised to run at a speed of at
least 7,000 r.p.m.
It is not permitted to use cutting-off wheels,
roughing wheels, fan-like grinding wheels
or wire brushes.
When using the renovation sander
LD 18-7 125 R/LD 18-7 150 R, connect
a Class M dust extractor.
no.: 315.915),
-