Instructions For Use - Flex LD 18-7 125 R Original Operating Instructions

Instructions for use

Before switching on the power tool
Unpack power tool and accessories and
check that no parts are missing or damaged.
Adjusting the handle
Loosen rotary knob for adjusting the

handle by turning it approx. 2 revolutions
anti-clockwise.
Place handle in the required position

(15° notch).
Ensure that handle engages correctly!
Tighten rotary knob for adjusting the

handle clockwise.
NOTE
If required, the handle can be moved
to the other side of the electric power tool.
20
LD 18-7 125 R/LD 18-7 150 R
Inserting and changing the sanding
tools
WARNING!
Before performing any work on the electric
power tool, pull out the mains plug.
Press and hold down the spindle lock (1.).

Using the stop key, loosen the clamping

nut on the spindle in an anti-clockwise
direction and remove (2.).
Insert diamond sanding pad (A) correctly.

Screw the clamping nut (B), with flange

face up, onto the spindle.
Press and hold down the spindle lock.

Tighten the clamping nut with the stop

key.