Kimberly-Clark SCOTT SCOTTFOLD 39711 Manual

Product Codes
Install Dispenser Bracket Installation
Enclosed
(x4)
For available spare parts contact your sales representative.
IMPORTANT! For secure mounting, follow these
instructions thoroughly. Ensure that the proper
mounting hardware is used for the appropriate
wall type.
1. Assess wall surface material to determine if
screw anchors are required.
2. Remove and discard protective insert (Figure 1).
3. Use a minimum of four screws, mount
dispenser to wall with bottom edge at desired
height (Figure 2).
INSTALLATION
IMPORTANT! Suivre attentivement les instructions suivantes
pour installer l'appareil de façon sécuritaire. S'assurer
d'utiliser la quincaillerie qui convient au type de mur.
SCOTT® SCOTTFOLD™ FOLDED TOWEL DISPENSER
DISTRIBUTRICE POUR ESSUIE-MAINS PLIÉS SCOTT® SCOTTFOLD™
39711 Black
(x4) (x1)
Tools Required:
1.
12" from
counter
48" from floor
*Check for ADA
regional & local
installing/mounting
requirements.
Use correct
drill bit for
anchor size
Form 034167