Kimberly-Clark SCOTT 09605 Manual

Product Codes 09605 White, 09604 Black
Install Dispenser Bracket Installation
Enclosed
(x4)
For available spare parts contact your sales representative.
IMPORTANT! For secure mounting, follow
instructions thoroughly. Ensure that proper
mounting hardware is used for appropriate wall
composition, as enclosed hardware may not be
compatible with your wall surface.
1. Locate the mounting bracket and screws
in the hardware packet provided. Using a
level, position the bracket approximately 36"
from floor and 7-9" from front edge of toilet
to center of bracket and use as a template
to mark holes for screws. Screw mounting
bracket into the wall, using marked holes as
a guide (Figure 1).
2. Temporarily mount the dispenser onto the
wall, sliding the bracket into place below the
back notches (Figure 2).
SCOTT® STANDARD ROLL TOILET PAPER DISPENSER
DISTRIBUTRICE DE PAPIER HYGIENIQUE EN ROULEAU STANDARD SCOTT®
Tools Required:
(x4)
1.
*Check for ADA regional
& local installing/
mounting requirements.
7 - 9"
Use correct
drill bit for
anchor size
FORM 034171