Kimberly-Clark 09906 Manual

Product Codes 09906 White, 09905 Black
Install Dispenser Bracket Installation
Enclosed
(x4)
For available spare parts contact your sales representative.
IMPORTANT! For secure mounting, follow these
instructions thoroughly. Ensure that the proper
mounting hardware is used for the appropriate
wall type.
1. Assess wall surface material to determine if
screw anchors are required.
2. Mount the dispenser with the bottom edge at
desired height. (Refer to ADA image on page
1).
3. Use 4 mounting screws as a minimum
to attach the dispenser to a wall at the
recommended mounting location (Figure 1).
INSTALLATION
IMPORTANT! Suivre attentivement les instructions suivantes
pour installer l'appareil de façon sécuritaire. S'assurer
d'utiliser la quincaillerie qui convient au type de mur.
UNIVERSAL FOLDED TOWEL DISPENSER
DISTRIBUTRICE UNIVERSELLE D'ESSUIE-MAINS PLIÉS
Tools Required:
(x4)
1.
10" from
counter
48" from floor
*Check for ADA
regional & local
installing/mounting
requirements.
Use correct
drill bit for
anchor size
Form 034170