Kimberly-Clark SCOTT SCOTTFOLD 09214 Manual

Product Codes
09214 White, 09215 Black

Install Dispenser Bracket

Installation
Enclosed
(x4)
For available spare parts contact your sales representative.
IMPORTANT! For secure mounting, follow these
instructions thoroughly. Ensure that the proper
mounting hardware is used for the appropriate
wall type.
1. Assess wall surface material to determine if
screw anchors are required.
2. Mount the dispenser with the bottom edge
at the desired height using a minimum of 4
screws, usually 48" inches above the floor or
12" above the counter (Figure 1). Please refer
to local ADA guidelines for final placement.
INSTALLATION
IMPORTANT! Suivre attentivement les instructions suivantes
pour installer l'appareil de façon sécuritaire. S'assurer
d'utiliser la quincaillerie qui convient au type de mur.
1. Évaluer le matériau de la surface du mur afin de
déterminer si des vis d'ancrage sont nécessaires.
2. Monter la distributrice en plaçant le bord inférieur
SCOTT® SCOTTFOLD™ FOLDED TOWEL DISPENSER
DISTRIBUTRICE POUR ESSUIE-MAINS PLIÉS SCOTT® SCOTTFOLD™
Tools Required:
(x4)
1.
12" from
counter
48" from floor
*Check for ADA
regional & local
installing/mounting
requirements.
Use correct
drill bit for
anchor size
Form 034168