Table of Contents
Advertisement
8.6 Fade time
8.7 MIDI functions
MIDI channel setting
1.
Press [MODE] and then [Tap/Disp]. The display now shows 'ONLY' or 'ALL' for 3 seconds,
depending on the current settings. 'ONLY' indicates that only the pan / tilt channels are
controlled by the [FADE TIME] fader. 'ALL' indicates that all channels are changed by the
fader.
2.
To switch between 'ONLY' and 'ALL' , hold down [MODE] and press [Tap/Disp].
1.
Keep [Midi/Rec] pressed for two seconds. The display shows the last set MIDI channel.
2.
Use the Scene UP / DOWN buttons to select a DMX channel 01 - 16 that you assign as
MIDI channel.
3.
Keep [Midi/Rec] pressed for two seconds or until all LEDs light up three times to save the
setting.
Operating
DMX DC-192
37
DMX Controller
Advertisement
Table of Contents
Need help?
Do you have a question about the BOTEX DMX DC-192 and is the answer not in the manual?