Check The Power Source - IBM 3931 Safety Inspection

Check the power source

Before you start, you must have completed the General Safety or equivalent course for this year and
reviewed the Safety Manual for IBM Service Personnel or equivalent handbook. Certain geographies might
have different safety training requirements. See the safety training requirements within your geography
for more information.
Attention:
• The following power check procedures must be performed by a Qualified Electrical Worker
(QEW) or licensed electrician.
• In countries where IBM service personnel are not qualified to perform this task, the customer
must arrange for a QEW or licensed electrician to perform the receptacle testing.
• The safety inspection is performed on all power cords.
If you, the IBM System Service Representative (SSR):
• ARE qualified to perform these tasks, complete the following power check procedures.
• ARE NOT qualified to perform these tasks, contact customer personnel to perform the necessary power
checks before continuing.
ENG-4 IBM: 3931 Safety Inspection