Myrinet Bladecenter Connectivity; Power Distribution Unit (Pdu); Related Documentation - IBM System Cluster 1350 Installation And Service Manual

Hide thumbs Also See for System Cluster 1350:
Table of Contents

Advertisement

v M3-SW32-16F line card (SW32 with 16 fiber port front connections)
v M3-2SW32 line card
v M3S-PCIXD-2-1 line card (2Mb)
v M3S-PCIXF-4-1 line card (4 Mb)
The high-speed switch can replace the optional secondary Ethernet switch. It
requires a Myrinet PCI adapter in each cluster node and storage node.

Myrinet BladeCenter connectivity

Myrinet BladeCenter connectivity support includes a Myrinet PCI card, the Optical
Pass thru Module, an I/O expansion card, and special cable options.

Power distribution unit (PDU)

Each rack contains one or more of the following power distribution units:
v IBM NetBAY Rack Power Distribution Unit (PDU)
v IBM NetBAY Front-End PDU
v IBM Distributed Power Interconnect (DPI
v IBM DPI Front-End PDU
v IBM DPI High Density PDU
Some PDUs are mounted sideways beside the rack space. The cluster supports rack
PDUs and front-end PDUs. The cluster can have the PDUs installed in the side
pockets and not accessible from the rear. Some of the newer cluster configurations
provide access to the PDUs from the rear of the system cabinet.
Rack PDUs provide power to components within a cabinet; front-end PDUs
provide the connection to the external power source and distribute the power
among the rack PDUs. To eliminate the need for the front-end PDU, a rack PDU is
directly connected to the external power source. Up to four front-end PDUs and up
to 12 rack PDUs can be placed in each cabinet.

Related documentation

Your cluster might have features that are not described in the documentation that
you received with the cluster. The documentation might be updated occasionally to
include information about those features, or technical updates might be available
to provide additional information that is not included in your cluster
documentation. These updates are available from the IBM Web site at
http://www.ibm.com/systems/support/.
To remove and configure a cluster component, see the documentation that comes
with the component.
To check for updated documentation, related documentation, and technical
updates, go to http://www.ibm.com/systems/support/.
To check for a list of components supported for each software release, go to
http://publib.boulder.ibm.com/cluster/1350downloads.htm.
®
) Rack PDU
Chapter 1. System overview
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cluster 1350

Table of Contents