Xilinx Silicon Labs CP210x Installation Manual page 6

5. Step through the guided installer. Accept the license agreement and install the software
on your PC. When the software is successfully installed, the dialog box shown in
is displayed.
X-Ref Target - Figure 2
6. The next step is to set up a terminal emulator. Continue with the instructions in the
appropriate quick start guide. At the appropriate time, you will be directed on the
configuration of the terminal settings. If you do not have a terminal emulator, download
the Tera Term emulator and follow the installation process in the Tera Term Terminal
Emulator Installation Guide (UG1036)
Use of the Tera Term terminal emulator is not required and other terminal emulators can
Note:
be used. Tera Term is recommended by Xilinx based on its long history as a reliable software
product.
Silicon Labs CP210x USB-to-UART
UG1033 (v1.0) February 12, 2014
Figure 2: USB-to-UART Bridge Driver Installer
[Ref
www.xilinx.com
Download and Install the Required Drivers
2].
Figure 2
6
Send Feedback