Installing The Handle - Dell Latitude 7424 Rugged Extreme Service Manual

2.
CAUTION: The following epoxy screw locations require additional focus. These screws are difficult to remove
and can be damaged during the removal process. To prevent damage to the screws and surrounding plastics,
use the correct screwdriver for each screw type .
Remove the four M3*6 screws [1] that secures the handle and the metal brackets to the computer.
3. Separate the metal bracket [2] and handle from the computer [3].

Installing the Handle

1. Install the handle [1] on the computer and place the metal brackets [2] on the handle.
2. Tighten the four M3*6 screws [3] securing the handle to the computer.
3. Follow the procedure in
60 Removing and installing components
After working inside your computer.