4. Install the:
a.
Battery bay
b.
PCIe Heatsink fan assembly
c.
Bottom chassis cover
d.
Batteries
5. Follow the procedure in
Smart Card
Removing the Smart Card Reader
1. Follow the procedure in
2. Remove the:
a.
Batteries
b.
Bottom chassis cover
c.
PCIe heatsink assembly
d.
Battery bay
3. Remove the tape from the smart card reader connector[1] and disconnect it [2] from the USH board.
4. Remove the tape from the fingerprint reader connector [3] and disconnect it from the USH board [4].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
115