b.
Batteries
6. Follow the procedure in
Primary SSD Rail
Removing the Primary SSD rail
1. Follow the procedure in
2. Remove the:
a.
Batteries
b.
Primary SSD
c.
Bottom chassis cover
d.
PCIe heatsink assembly
3. Peel off the inductive tape on the SSD FPC connector [1] on system board and disconnect it [2].
4. Remove the 6 'M2*3' screws [3] and remove it from the computer [4].
Installing the Primary SSD rail
1. Connect the SSD cable [1] to the system board, secure it using a piece of tape [2].
2. Install the primary SSD rail [3] on the system board and tighten the six 'M2*3' screws [4] securing it to the system board.
86
Removing and installing components
After working inside your
Before working inside your
computer.
computer.