Save Results; Exporting Detected Point Grids; Visualization Of The Results Data - Image Engineering Geocal User Manual

10.7 Save results

10.8 Export detected point grids

10.9 Visualization of the results data

Issue EN 2024-03 Geocal / Geocal IR / Geocal XL User Manual
HDR image data folder in which all generated images are
saved.
You have the option of saving your results in either an XML or a CSV
file. If you have analyzed several images, select one or more images
whose results you would like to save from the list in the "Image data"
section.
Then click on File → Save result → Save XML or Save CSV → navi-
gate to the desired storage location → click on Save
If you have selected several images, all results are saved in a CSV or
XML file.
You can export three different grids, which are saved in CSV files.
Two files are saved for each exported grid, one for the x-coordinates
and one for the y-coordinates.
To export a grid, click on File → Save grid → select the desired grid
→ navigate to the desired storage location → click on Save.
Available grid types:
•
Detected grid: Describes the grid type that contains the de-
tected light points.
•
Reprojected raster: Describes the raster type that contains
the reprojected light points used to determine the distortion.
•
Undistorted reference grid: Describes the grid type that con-
tains the points of the reference grid without lens distortion.
This raster only contains the distortion given by the DOE
physics and the extrinsic and intrinsic parameters determined.
Various visualization types are available:
10.9. 1Grid view
After a successful analysis, the detected and newly projected points
are displayed on the original image. Zoom into the image to get a bet-
ter view. The dots have a size of one pixel.
Operating software 10
41/48