Check Points Of Every 50 Hours - Kubota RTV1100 Workshop Manual

RTV1100, WSM

[3] CHECK POINTS OF EVERY 50 HOURS

Checking Engine Start System
CAUTION
• Do not allow anyone near the vehicle while testing.
• If the vehicle does not pass the test do not operate the
vehicle.
Preparation before testing
1. Place all control levers in the "NEUTRAL" position.
2. Set the parking brake and stop the engine.
Test : Switch the range gear shift lever
1. Sit on the operator's seat.
2. Shift the range gear shift lever (1) to H, M, L or reverse position.
3. Return the speed control pedal (2) to the "NEUTRAL" position.
4. Shift the hydraulic lift cylinder lever (3) to the "NEUTRAL"
position.
5. Turn the key to "START" position.
6. The engine must not crank.
7. If it cranks, adjust or replace the required safety switch.
(1) Range Gear Shift Lever
(2) Speed Control Pedal
G-27
G GENERAL
(3) Hydraulic Lift Cylinder Lever
W1062701
KiSC issued 03, 2008 A