Using Watch Operations To Adjust The Time Setting - Casio 5728 Operation Manual

Table of Contents

Advertisement

Using Watch Operations to
Adjust the Time Setting
If your watch cannot connect with a phone for
some reason, you can use watch operations
to adjust date and time settings.
Setting a Home City
Use the procedure in this section to select a
city (time zone) to use as your Home City.
Important!
If you do not specify the city (time zone)
where you are using the watch, the
current time setting will not be correct
after it is adjusted based on a time
calibration signal.
1.
Pull out the crown to the first click.
The second hand will move to the city
code of the currently selected Home City.
30
Home City (time zone)
2.
Rotate the crown to change the Home
City.
You can also select a time zone whose
name is not indicated on the face of the
watch.
For details about time zones, refer to the
information below.
City Table
l
3.
Push the crown back in.
Watch Operation Guide 5728
Adjusting the Time and Day Setting
1.
Pull out the crown to the second click.
This enables the hour and minute setting
operation.
The second hand will indicate whether the
current time is a.m. or p.m.
The 3-second position is a.m., while the
57-second position is p.m.
p.m. (57-second position)
2.
Rotate the crown to adjust the hour and
minute settings.
3.
Press (A).
This enables the year ten's digit setting
operation.
4.
Rotate the crown to move the second
hand to the desired setting for the year
ten's digit.
Crown
5.
Press (A).
This enables the year one's digit setting
operation.
a.m. (3-second position)
30
Crown
Year (10's digit)
00
10
20
90
30
80
40
70
50
60
6.
Rotate the crown to move the second
hand to the desired setting for the year
one's digit.
Year (one's digit)
0
1
9
8
7
5
6
7.
Press (A).
This enables the month setting operation.
12
11
1
10
9
8
7
5
6
Month
8.
Rotate the crown to change the month.
9.
Press (A).
This enables the day setting operation.
30
Day
10.
Rotate the crown to change the day.
To return to the hour and minute setting
operation, press (A).
11.
On a time signal at the top of a minute,
push the crown back in.
2
3
4
2
3
4
15

Advertisement

Table of Contents
loading

Table of Contents