Checking The Watch Charge Level; Recording Your Current Location (Time&Place); Connection; Connecting With A Phone - Casio 5728 Operation Manual

Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with CASIO WATCHES.
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (A) for at least 2.5 seconds.
This establishes a connection between
the watch and phone.
3. Y
Use CASIO WATCHES to check the
charge level.
Recording Your Current
Location (TIME&PLACE)
While traveling or otherwise on the go, you can
use the procedure below to record your
current location, along with the time and date,
on your phone. Recorded location information
can be viewed on the CASIO WATCHES
phone app map while the watch is connected
with your phone.
Recording Your Current Location
●
1. X
Hold down (A) for at least 0.5 seconds
until the second hand points to [C].
Release the button as soon as the second
hand points to [C].
This records, in phone memory, the
latitude and longitude of the location you
are in when you press the button, along
with the date and time.
When location recording is successful,
●
the second hand performs one
revolution and then points to [C] again.
Next, watch syncs its time setting with
your phone.
Viewing a Recorded Location on a Map
●
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Perform the operation shown on the
phone screen to view recorded location
information.
Note
You can use the CASIO WATCHES
●
phone app to delete recorded location
information.
Watch Operation Guide 5728

Connection

Connecting with a Phone

This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
Pair the watch with a phone.
l C
1.
Move the phone close to (within one meter
of) the watch.
2. X
Hold down (A) for at least 2.5 seconds.
This establishes a connection between
the watch and phone.
Important!
If you have problems establishing a
●
connection, it could mean that the
CASIO WATCHES phone app is not
running on your phone. On your
phone's home screen, tap the "CASIO
WATCHES" icon. After the app starts
up, hold down the watch's (A) button
for at least 2.5 seconds.
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with
the CASIO WATCHES phone app:
"Watch settings"
with the app". Next, select a setting of
3 minutes, 5 minutes, or 10 minutes.
"Connection time
n

Disconnecting from Your Phone

Pressing (A) terminates the Bluetooth
connection and returns the second hand to its
normal operation.
Connected Disconnected
30
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable auto time
correction. To re-enable auto time correction,
perform the same operation again.
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (A) for at least 2.5 seconds.
This establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen to enable or disable auto
time correction.
30
11