Linking With A Phone; Getting Ready; Auto Time Correction - Casio 5728 Operation Manual

Linking with a Phone

While there is a Bluetooth connection
between the watch and phone (Mobile Link),
the watch's current time setting is corrected
automatically. You can also change the
watch's other settings.
Note
This function is available only while the
●
CASIO WATCHES phone app is
running on the phone.
This section describes watch and
●
phone operations.
: Watch operation
X
: Phone operation
Y

Getting Ready

To use your watch in combination with a
phone, you first need to pair them. Perform the
steps below to pair the watch with a phone.
Install the required app on your
●
A
phone.
In Google Play or the App Store, search for the
"CASIO WATCHES" phone app and install it
on your phone.
Configure Bluetooth settings.
●
B
Enable the phone's Bluetooth.
Note
For details about setting procedures,
●
see your phone documentation.
Watch Operation Guide 5728
Pair the watch with a phone.
●
C
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move the phone to be paired with close to
(within one meter of) the watch.
2. Y
Tap the "CASIO WATCHES" icon.
3. Y
Tap the
4. Y
Perform the operation shown on the
phone screen to register the watch to the
CASIO WATCHES phone app.
5. X
Hold down (A) for at least 2.5 seconds
until the second hand points to [C].
When a connection is established
between the watch and phone, the
second hand moves to [C].
If pairing fails, the watch returns to the
●
state it was in before starting this
procedure. Perform the pairing
procedure again from the beginning.
Note
The first time you start up the CASIO
●
WATCHES phone app, a message will
appear on your phone asking if you
want to enable location information
acquisition. Configure settings to allow
background use of location
information.
of the "My Watch" tab.

Auto Time Correction

The watch will connect with a phone at preset
times each day and adjust its time settings.
Using This Function
●
Your watch adjusts its time setting four times
a day according to a preset schedule. It
performs the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
Important!
The watch may not be able to perform
●
auto time correction under the
conditions described below.
While the watch is too far away from
ー
its paired phone
While communication is not possible
ー
due to radio interference, etc.
While the phone is updating its
ー
system
While the CASIO WATCHES phone
ー
app is not running on the phone
Note
If the watch does not indicate the
●
correct time even if it is able to connect
with a phone, adjust the hand and day
indicator positions.
Adjusting Hand and Day Indicator
l
Alignment
The watch will connect with the phone
●
and perform auto time correction at
around 12:30 a.m., 6:30 a.m., 12:30
p.m. and 6:30 p.m. The connection is
automatically terminated after auto
time correction is complete.
9