Mount The Camera - Reolink RLC-540A Quick Start Manual

Mount the Camera

Installation Tips
• Do not face the camera towards any light sources.
• Do not remove the protective film from the dome cover until the instal-
lation is complete.
• Do not point the camera towards a glass window. Or, it may result in
poor image quality because of the window glare by infrared LEDs,ambi-
ent lights or status lights.
• Do not place the camera in a shaded area and point it towards a well-
lit area. Or, it may result in poor image quality. To ensure the best image
quality, the lighting condition for both the camera and the capture object
shall be the same.
• To ensure better image quality, it's recommended to clean the dome
cover with a soft cloth from time to time.
• Make sure the power ports are not directly exposed to water or mois-
ture and not blocked by dirt or other elements.
• With IP waterproof ratings, the camera can work properly under condi-
tions like rain and snow. However, it doesn't mean the camera can work
underwater.
• Do not install the camera at places where rain and snow can hit the lens
directly.
7 English
Install the Camera
1
2
3
Put the mounting template on
the ceiling and drill holes at the
indicated locations, then insert
the drywall anchors.
Screw the dome cover off the
camera base with the hex key.
NOTE: Keep the protective film on the
dome cover until the installation is
complete.
Screw the camera base to the
ceiling.
English 8