Table of Contents
Advertisement
Connection Diagram
Before initial setup, follow the steps below to connect your camera.
1. Connect the camera to a LAN port on your router with an Ethernet
cable.
2. Use the power adapter to power on the camera.
NOTE: You can power the camera with a PoE switch, PoE injector, Reolink
PoE NVR or a DC 12V power adapter(not included in the package).
PoE IP Camera
Router
5
English
Ethernet Cable
PoE Injector*
Power Adapter
Set up the Camera
Download and launch the Reolink App or Client software, and follow the
onscreen instructions to finish initial setup.
• On Smartphone
Scan to download
the Reolink App.
• On PC
Download path of the Reolink Client: Go to
> App & Client.
NOTE:
• If you are connecting the PoE camera to a Reolink PoE NVR, please set
up the camera via the NVR interface.
https://reolink.com
> Support
English
6
Advertisement
Table of Contents
Need help?
Do you have a question about the RLC-843A and is the answer not in the manual?
Questions and answers
can i mount it to a wall
Yes, the Reolink RLC-843A can be mounted to a wall, but its adjustability is limited when installed vertically or on a wall.
This answer is automatically generated