Remote Annunciators Installation
Up to 31 RA-4410G3 annunciators can be connected to the VFR-500. The RA-4410G3 provides the same user interface including
the same LED and LCD display and keypad as the main panel.
Setting Addresses
An annunciator's address is set by dip switch S21, which is located on the back of the annunciator. The address must be set in the
range of one to thirty one (1–31) to be recognized by the panel. (Refer to the "P-Link Addresses" table)
Figure 25. Annunciator Back Panel View
Dip Switch
P-Link
Connections
VFR-500 • 5403789 • REV A • 10/23
3-27