Module Installation
Initiating Device Circuit Module - IDC-6
The panel supports up to four (4) IDC-6 modules. The IDC-6 is controlled over the 4 wire P-Link connection. The IDC-6 mounts
in the panel cabinet (up to two (2)) as shown below. It also can be mounted in the AE-2, AE-8 or AE-14 accessory cabinets..
Note: When using an accessory cabinet, the cabinet MUST be mounted within 20 feet of the panel or power supply
Figure 19. IDC-6 Module locations
VFR-500 • 5403789 • REV A • 10/23
3-23
IDC-6 Mounting Location
VFR-500
Cabinet
IDC-6 Mounting Location
(Not available if CA-4064
is installed)