T Soft Brake Assembly, Take Up Reel - Sony SLV-E105 Service Manual

3-12-4. T SOFT BRAKE ASSEMBLY, TAKE UP REEL
ASSEMBLY, T REEL GEAR (See Fig.3-12-4)
1) Remove the T soft spring@.
2) Remove the clamp @, then remove the T soft brake
assembly @.
3) Refer tosection 3-12-2 and remove the clutch mounting
assembly.
4) Pressing the T brake assembly@ in the direction of the
arrow, remove the take up reel assembly © and the T
reel gear®.
ASSEMBLY NOTE:
1. After cleaning the shafts @ and ©, apply a drop of oil
NT-68 to each.
©®Take up reel
©T reel gear assembly
@T soft brake
<«— assembly
@T brake
assembly | yp
'OT soft
i | spring
@Shatt |
° @®shatt~ a
a0 ee.
o ©
Fig.3-12-4
3-13. BRAKES
3-13-1.S BRAKE ASSEMBLY, T BRAKE ASSEMBLY,
1)
2)
3)
4)
5)
T BRAKE ACT SLIDE (See Fig.3-13-1)
Refer to section 3-3-1 and remove the cassette
mechanism assembly.
Remove the two clamps @), then remove the T brake
act slide @. (Note: You can remove the S brake
assembly @ and the T brake assembly © without
removing the T brake act slide @).)
Remove the brake spring @).
Remove the two clamps @ simultaneously, then
remove the T brake assembly ©.
Remove the clamp@®, then remove the S brake
assembly @).
ASSEMBLY NOTES:
1.
2.
Apply grease SGL-505 to the shafts @ and ©.
When fitting the T brake act slide @, align the mark @
with the shaft @.
@T brake act slide
@ Mark
@Brake spring
@S brake
ne
"~ @ Clamps
Fig.3-13-1