Table of Contents
Advertisement
For operation on
380-415V3N~
five-core cable
(5 x 1.5 mm²)
380-415V2N~
four-core cable
(4 x 1.5 mm²)
220-240V ~
three-core cable
(3 x 2.5 mm²)
Complete wiring up to power supply with an
appropriately rated five-core plug (see data
plate) or, in case of operation from a 220-
240V power supply, with a three-core plug.
Make sure that plug and wall socket are of
the same type and are in conformity with
regulations in force. Make sure that the
appliance is properly earthed. Before
powering, check that the power line is
properly earthed. Avoid using adapters or
shunters.
Levelling the appliance
After making the electrical and/or gas
connections, level the appliance on the floor
Cable type H05V2V2
by means of its four adjustable feet. The
appliance must be properly levelled to
ensure stability.
Rear top skirtboard
Caution! Always install the rear
top skirtboard which is an integral
part of the appliance.
1 Loosen nuts B.
2 Position the skirt C above the top, taking
care to align it correctly.
3 Secure the skirt to the top by tightening
screws A.
26
Hide quick links:
Advertisement
Table of Contents
