Automatic Programmer - John Lewis JLFSEC608 Instruction Manual

Automatic programmer

1 Minute-timer key
2 Cooking period key
3 End time key
4 Decrease time key
5 Increase time key
Before setting the programmer
for semi/automatic cooking,
activate the desired function and
temperature.
Set the clock:
When using the oven for the first time, or
after a power failure, the display flashes
regularly and indicates 00:00. Press the keys
"cooking period" key and "end time key" at
the same time the keys
single press changes the time by 1 minute
either up or down.
or : each
14
Minute counter:
The programmer can be used as a simple
minute counter:
1 Keep pressed the "minute timer" key.
2 Use the or
lenght of time required. The
will appear on the display.
After set-up, to see the remaining
time, press the "minute timer"
key.
Use as a minute counter does not
interrupt functioning of the oven
at the end of the programmed
time.
To set the oven to switch off
automatically after a set period:
(only for main oven)
Use this function if you have already started
cooking and want the oven to switch-off at
the end of cooking time.
(for example after 45 minutes)
1 Press the "cooking period" key, the
display lights up, showing 00:00.
2 Use the or
desired cooking time. The 'A' simbol will
appear on the display, and the current
clock time will be shown.
After set-up, to see the cooking
time remaining, press the
"cooking period" key; to see the
end of cooking time press the key
"end time key".
keys to select the
symbol
keys to set the