LASER CLASS 3170/3175/3175MS Chapter 5: Appendix
Processing When Trouble Occurs
Very rarely, during use the display may go out, all the keys stop working, or some
other trouble occur because of intense noise or a strong shock. If such trouble
occurs, perform an All Clear operation. During installation, we recommend that
you perform an All Clear operation.
Below is the procedure for performing an All Clear operation.
When perform an All Clear operation, all the registered data is erased
and all the service data is initialized.
DATA REGISTRATION
Data Registration
SET
Set
#8 CLEAR
CLEAR OK
Display #8 CLEAR by
#
#
pressing
Display ALL by
#8 CLEAR
X 1
pressing
or
button
ALL
PLEASE WAIT
Figure 5-1 All Clear
5-42
SERVICE MODE
SERVICE MODE
X 3
or
button
#8 CLEAR
#8 CLEAR
#8 CLEAR
SET
Set
ALL
Set
Standby