What To Do When A Problem Occurs (All Clear) - Canon LASER CLASS 3175 Service Manual

LASER CLASS 3170/3175/3175MS Chapter 1: Safety and Precautions

3.6 What to do when a Problem Occurs (All clear)

Very rarely, during use, the display may go out, all the buttons may stop working,
or some other trouble may occur because of strong electrical noise or strong shock.
If such trouble occurs, perform All clear operation.
During installation, we recommend that you perform All clear operation. Below is
the procedure for performing All clear.
Data Registration
Set
#8 CLEAR
CLEAR OK
While waiting to return to the ready state after executing "All clear",
please do not press the Stop button. Doing so may cause a malfunction
afterwards.
Display #8 CLEAR by
#
pressing
Display ALL by
pressing or button
PLEASE WAIT
Figure 1-13 All Clear
SERVICE MODE
or button
#8 CLEAR
#8 CLEAR
ALL
1-30
Set
Standby