RTA-2050C Replacement Parts for International Do a quick inventory For Support, assembly questions Customers & AK-HI-PR orders: of all the parts and & Replacement Parts within the 48 Contiguous United States: RTA Products will replace the part free of hardware listed below.
Page 3
RTA-2050C BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS. • Do not discard this manual or any of the packaging material until the unit is completely assembled. • Please read the assembly instructions throughly and follow step by step.
RTA-2050C ASSEMBLY STEPS STEP 1 Turn over the seat B and assemble the mechanism D with screws M and Hardware washers O. M6x20 (Back) (x4) Ø8, 17Ø Tools (included) (x4) (Front) (Front) STEP 2 Insert the casters F into each leg of the base C using pressure, then place the lift cylinder E in the middle of the base and cover it with H.
Page 5
RTA-2050C STEP 4 Attach the lumbar pillow I and the neck pillow J to the backrest A by fastening the buckles on the other side as shown. Buckle up STEP 5 First assemble the metal plate from the backrest A inside the plate of the Hardware mechanism D with screws L, O-Rings N and washers O as shown.
RTA-2050C CHAIR'S FUNCTIONS To raise or lower the chair’s height, pull UP the first lever (the one under the seat on the right side). The chair goes down while sitting on it, or up if you lift your body. To recline the backrest, pull UP the second lever. The backrest will recline freely when the lever is in the UP position.
Page 7
TECHNI MOBILI WARRANTY EXECUTIVE/MANAGER CHAIR: 2-YEAR WARRANTY RTA Products, LLC has warranted the Techni Mobili office chairs to the original purchaser who acquired a new product from RTA Products or its authorized resellers of the product against defects in material or workmanship.
Need help?
Do you have a question about the RTA-2050C and is the answer not in the manual?
Questions and answers