8.2 Before washing
Use only detergents and rinse aids for industrial dishwashers.
Do not use detergents intended for hand washing.
We recommend the use of Smeg products, specially developed for this dishwasher.
When topping up the tanks, take care not to swap the products; this might damage the
dishwasher and cause malfunctions.
Do not mix different detergents; this would damage the dispenser device.
Industrial dishwasher detergents may cause serious irritation. Comply carefully with the instructions
provided by the detergent producer on the pack.
Turn on the
mains water
detergent and
tap (user)
rinse aid in the
8.3 First use each day (tank and boiler empty)
Indicator lights showing: off; green; orange;
Display shows
That there is
The level of
regenerating salt
in the relative
container (if
containers.
‐ CWH 520
Check:
That the filters are in
place, the spray arms
rotate, and there are
no foreign bodies in
fitted).
the dishwasher.
flashing.
Actions and what happens
With the door closed:
Press
and hold it down, with word FILL appears.
the dishwasher fills the tank after the water in the boiler
has heated up; light L2 shows orange and the boiler
heating element symbol appears on the display.
Wait for P1 to appear and LED L1 to change from red to
green; the tank heating element light comes on until the
set temperature is reached. The duration of this stage may
vary depending on the mains water temperature and on
25
Switch on the
master switch
(user): the word
"OFF" appears on
the display.