When the door is closed again, the system offers the last program run.
‐ CWH 520
the single‐phase connection.
Press the
boiler (right) temperatures for a short time.
Load the dishes
Select the program required by pressing .
Confirm the program start by pressing
down for 1 second (light L2 changes from green to
orange).
Cycle in progress, the progress of the cycle is displayed by
vertical bars which illuminate in sequence. If the door is
opened "CLOSE" flashes and the program stops; when it is
closed again the program restarts from the beginning.
At the end of the program "End" flashes
Unload the dishes
26
button quickly to display the tank (left) and
and holding it