This submenu and the relative functions can only be
accessed with the aid of a password available on
SmegTech and only by technical staff.
6.2 Quit "SET‐UP" menu
Wait more than 10 seconds without pressing any button and the appliance quits this menu
automatically,
or press the on/off
Indicator lights showing: off; green; orange;
Caution:
the tank and boiler temperatures shown on the display may be differ from the actual
temperatures by a few degrees, especially in transient phases (just after the FILL is completed, just after
the end of the cycle, etc.) due to the inertia of the measurement probe.
6.3 Rinsing temperature setup
6.4 Washing temperature setup
Indicator lights showing: off; green; orange;
6.5 Rinse aid dispensing setup
button to exit.
Modify the value of the
parameter by pressing .
‐ CWH 520
flashing.
Modify the value of the parameter by pressing .
(Default value: 85°C)
Min. 71°C – max. 85°C
Modify the value of the parameter by pressing .
(Default value: 62 °C)
Min. 52°C – max. 62°C
flashing.
17
RINSE AID
Delivery time
Delivery
(s)
quantity (c.c.)