Before Washing - Smeg UD505DAUS Translation Of The Original Instructions

Using the buttons
Button
Display of
temperatures in
Boiler (L3) and tank
(L1)
Set P0

9.1 Before washing

Use only detergents and rinse aids for industrial dishwashers. Do not use detergents intended
for hand washing.
We recommend the use of Smeg products, specially developed for this dishwasher.
When topping up the tanks, take care not to swap the products; this might damage the
dishwasher and cause malfunctions.
Do not mix different detergents; this would damage the dispenser device. Failure to comply with this
recommendation leads to forfeiture of the warranty entitlement on the appliance's water system.
Industrial dishwasher detergents may cause serious irritation. Comply carefully with the instructions
provided by the detergent producer on the pack.
Check:
Turn on the mains
water tap (user)
Short press
On/OF
Start Short
Programme
Start Medium
Programme
Start Long
Programme
The level of
detergent and
rinse aid in the
containers.
Pressed for 2"
Start total drain (tank + boiler)
Start programme P0: emptying of tank to
clean filters.
Switch off and back on to allow reuse.
That there is
regenerating salt in
the relative
container (if
fitted).
23
Pressed for 5"
That the filters are in
place, the spray
arms rotate, and
there are no foreign
bodies in the
dishwasher.
Switch on the
master switch
(user): the
decimal points
of both digits
appear on the
display.