Advertisement
Changing display image or settings of the monitor
n Change by connecting a computer
Connect the monitor to the computer running this software, and change the display image/settings.
1. Connect the power source to the monitor.
2. Connect the Computer/USB flash drive connection terminal of the monitor to the computer using a commercially
available USB cable (Type-C, conforming to the USB standard).
When the monitor is in power save state, press the monitor power button and return to normal state from power save state.
(See page 6.)
3. Start this software. (See page 4.)
4. When changing the display image: Click "Slideshow".
When changing the settings: Click "Panel" or "e-Signage S Player A1".
5. Load settings.
(1) Click "Receive" on each settings screen.
(2) Select "EP-device" and click "OK".
The monitor settings will be loaded.
6. Change the settings. (See page 6.)
7. Export the settings once they are complete.
(1) Click "Send" on each settings screen.
(2) Select "EP-device" and click "OK".
The settings will be applied in the monitor.
8. Click "
" and exit this software.
9. Remove the USB cable from the monitor.
n Change by using a USB flash drive
Save the display image/settings to a commercially available USB flash drive. Connect the USB flash drive to the monitor, and
apply the display image/settings.
Check the manual for the monitor and use a USB flash drive that is supported.
1. Connect the USB flash drive to the computer.
When the monitor is in power save state, press the monitor power button and return to normal state from power save state.
(See page 6.)
2. Start this software. (See page 4.)
3. When changing the display image: Click "Slideshow".
When changing the settings: Click "Panel" or "e-Signage S Player A1".
4. Load settings.
This operation is not required the first time.
(1) Click "Receive" on each settings screen.
(2) Select "USB flash" and click "OK".
The monitor settings saved on the USB flash drive will be loaded.
5. Change the settings. (See page 6.)
6. Export the settings once they are complete.
(1) Click "Send" on each settings screen.
(2) Select "USB flash" and click "OK".
The settings will be applied in the USB flash drive.
7. Click "
" and exit this software.
8. Remove the USB flash drive from the computer.
9. Connect the power source to the monitor.
10. Connect the USB flash drive to the computer/USB flash drive connection terminal on the monitor.
The settings saved on the USB flash drive will be applied in the monitor.
The indicator will flash red while the USB flash drive is being accessed. Do not remove the USB flash drive.
The indicator will stop flashing red when it has been applied.
11. Remove the USB flash drive once the settings have been applied.
T I P
• Settings can be saved in any location.
Select "Folder" on the export screen and specify the save location and file name.
Select "Folder" and select file on the loading screen when loading a saved settings file.
• The status can be displayed with "Status", "Receive".
• Connect either a monitor or USB flash drive to the computer.
A monitor and USB flash drive cannot be used at the same time. Furthermore, multiple monitor and USB flash drives cannot
be used.
5
E
Advertisement
