Advertisement
n Slideshow
Image list
Specify the images to show on the monitor and the display order.
Add ............................. Add a display image to the image list.
Up / Down .................. Change the image order.
Delete ......................... Delete image from image list.
Preview
The image selected in the image list will be displayed.
Select the monitor and the way it should be installed from the pull-down menu.
Image Rotation
Specify the image rotation direction.
Automatic screen switching settings
Use Automatic Mode when this option is set to on. The following image will be displayed automatically at the interval set in "Loop
times".
Use Manual Mode when this option is set to off. The following image will be displayed when you press the MODE button on the
monitor.
Loop times
Specify the image change interval.
The interval time includes the image change time. The image display time will be approx. 30 seconds shorter.
Power Save Mode
When this option is set to on, the monitor will enter power save state after the image has displayed.
When in Manual Mode, the monitor will enter power save state after the image has displayed.
When in Automatic Mode, the monitor will enter power save state and return to normal state to match the "Loop times" setting.
Receive
Load the settings to this software.
USB flash ................... The settings saved on the USB flash drive will be loaded.
EP-device ................... Load the settings from the monitor connected with the USB cable.
Folder ......................... Load the settings file saved in any location.
Send
Export the settings of this software.
USB flash ................... Save the settings to a USB flash drive.
EP-device ................... Apply the settings to the monitor connected with the USB cable.
Folder ......................... Save the settings in any location.
Reset
Return the setting for "Slideshow" to the initial value.
T I P
• In power save state,
- the monitor indicator is turned off.
- the monitor MODE button and PAIRING button will not operate.
- it will return to normal state from power save state when the monitor power button is pressed.
• It will not enter power save state when the monitor and computer are connected.
• The computer will not recognize the monitor when the monitor is in power save state, even when it is connected. Furthermore,
the monitor will not recognize a USB flash drive even if a USB flash drive is connected to the monitor.
It will recognize them if you press the monitor power button and return it to normal state from power save state.
6
E
Menu item details
The settings will be applied to the monitor when the USB flash drive is connected to the monitor.
Advertisement
